Reverse the Rotation of Pellet Stove Auger Motor

HOW TO REVERSE ROTATION

• Hold the auger motor in your hand with motor side facing you.

• Remove 2 black screws holding the bearing cap.

• Remove bearing cap.

• Remove the 2 silver bolts holding the black magnet in place.

• Remove black magnet, flip it over, and place back onto motor.
(Do not flip the bearing shaft, only the black magnet)

• Reinstall silver bolt(s) on magnet.

• Reinstall bearing cap. Reinstall last two silver screws.

IF MAGNET OR BRACKET IS NOT SEATED PROPERLY OR OVERTIGHTENED THE MOTOR MAY NOT SPIN
MH003 Disassembled 

YOU MAY ALSO LIKE